Nova Security Systems Ltd
Honeywell Security Alarms Manuals
To TEST the system:
1. Enter the User Code.
2. Press 5 (TEST).
Note: The outside bell/sounder will ring for 5 seconds and the strobe will flash until the test is finished. All LED’S on the keypad will light up for 5 seconds. Test each
zone individually when the keypad stops scrolling and the bell/sounder stops ringing. Activate the zone to verify display of zone on the LCD, two beeps will sound. To exit test mode enter the User Code and wait for two beeps.
Omitting Zones [6]
To Omit Zones:
1. Enter the user code.
2. Press 6 (Omit).
3. Enter the Zone Number(s) to be isolated.
4. Press * to finish or wait 5 seconds.
5. Set the system
e.g. To omit zones 6, 7 and 8, press 1234 6 678. Zone LED 6, 7 and 8 will flash.
Press * or wait 5 seconds.
To correct a wrong omitted zone:
1. Enter the User Code
2. Press 6 (Isolate)
3. Press * or wait for a confirmation beep.
Note: Fire, Silent PA and PA cannot be isolated.
Galant User Manual
Your Galant panel has various system functions, which can be accessed by one of three methods:
• type a user code at a keypad
• press a button on an RF keyfob or
• present a keytag to a proximity reader.
The system can support up to 8 users. User 1 is assigned as the master user. Each user can have a user code (master user code is 1234 by
default) and either a fob or a tag. Your installer will indicate which methods are available on your system.
The following diagram shows an RF keyfob:
Galaxy Classic 8. 18 .60 User Manual
The Galaxy alarm system is, in fact, a computer which has been designed using the latest software and hardware technology.
First and foremost, the Galaxy meets all your security needs. The engineer will program and commission the system to your own exacting requirements.
Galaxy 16, 16+ User Manual
The Galaxy 16 and 16 plus control panels are designed to the highest specifications and requirements using the most advanced software and hardware technology.
The Galaxy 16 and 16 plus are designed to satisfy the requirements of domestic and smaller commercial installations, yet are flexible enough to provide ease of use and operational versatility. This User’s Guide contains the information required to operate the system. The installation engineer will program and commission the system to meet your requirements. The system is simple to operate but users are advised to read this guide carefully before using the system and retain it in a safe place for future reference.
The Galaxy 2-44 is a programmable alarm control panel that will allow you to protect your home or business by providing secure and reliable intruder detection. The system can be fully tailored by your installer to operate in the most convenient way for your lifestyle or working practice. If there are any changes in your requirements, your installer will be able to make any necessary changes to the system configuration in order to continue to provide the best protection whilst maintaining ease of use. An alarm system will protect you best only when used correctly. Please take the time to read through these instructions carefully in order to get the best from your alarm system, and avoid false alarms.
First and foremost, the Galaxy 3 Series meets all your security needs. The engineer will program and commission the system to your own exacting requirements.